Your Pool Safety Report Explained: What Happens Next
Your pool safety report tells you two things: whether your barrier passes, and exactly what to fix if it doesn’t. It lists every finding for your barrier, gates and latches. It also confirms whether your pool or spa is registered with council. Each item is marked compliant or non-compliant, and every issue has a clear recommendation beside it.
What happens next depends on the result. A pass means you receive your certificate of compliance. A fail means you fix the listed items and book a reinspection.
That’s the short version. Below, we walk you through each part of the report, based on the barriers our VBA registered inspectors check across Melbourne every week. We also cover the problems we find most often in local backyards. Then we show you how to get a clean result without paying for wasted trips.
What a pool safety report includes
A good report is never a vague pass or fail. It should read like a to do list you can hand straight to a fencer or handyman. That’s how we write ours, and here’s what it covers.
Barrier, gate and latch findings
The barrier is the heart of the report. Our inspectors are registered with the Victorian Building Authority (VBA), the state body that registers building practitioners in Victoria.
On every visit, the inspector checks these points:
- Fence height, measured from the ground on the outside of the barrier.
- Gaps under and between panels, checked against the 100mm limit.
- The condition of panels, posts and any boundary fence that forms part of the barrier.
- Gates, hinges and latches, tested by hand from several positions.
- The area around the fence line, looking for anything a child could climb.
- Signage and council registration status.
We assess barriers against the Victorian Building Regulations 2018. Depending on when the pool was built, we also refer to AS 1926.1, the Australian Standard for pool safety barriers. In plain terms, these are the rules that set the height, gap and gate requirements you’ll see in the report. The VBA publishes guidance on these rules if you’d like to read the official wording.
We test every gate from several positions, not just fully open. In our experience, a gate that shuts well from wide open will often stall or bounce when released from halfway. It must swing shut on its own and latch on the first try, every time.
Registration status of the pool or spa
Victorian owners must register their pool or spa with their local council. The report notes whether this has been done. Even a perfect fence won’t get you over the line if registration was missed, so it’s worth checking early.
Compliant and non-compliant items, listed one by one
We record each part of the barrier separately, so you can see exactly which parts passed and which didn’t. That takes the guesswork out of where to spend your time and money.
Recommendations for each issue found
For every failed item, we explain what’s wrong and what will fix it. Compare these two notes:
| Vague note | Useful note |
|---|---|
| Fence gap issue | Gap under panel near the shed measures over 100mm. Reduce to under 100mm. |
| Gate problem | Gate does not latch when released from halfway open. Adjust hinge tension and realign the striker. |
The second column is what you and your tradie actually need. It tells them where to look, what to measure and what to change.

How to read your pool safety report
When your pool or spa barrier is compliant
A compliant result means every item we checked met the standard on the day. You can move straight to certification. Apart from normal upkeep, there’s nothing more to do until your renewal is due.
When your barrier is non-compliant
A non-compliant result is common, and it’s usually very fixable. Start with the list of failed items. Most are small jobs, like adjusting a hinge, trimming a shrub or moving a pot plant. Work through them one at a time, and take photos as you go so you have a record of what changed.
Why the report covers what the inspector can see on the day
An inspection is a visual, non-invasive review of the barrier parts we can reach as they stand on the day. Put simply, we look and test, but we don’t pull anything apart. The report can’t guarantee against hidden faults or problems that develop later. A latch spring that wears out next winter is a good example, which is why regular upkeep still matters after you pass.
The issues we flag most often in Melbourne backyards
We inspect barriers from Kew and Camberwell out to Warrandyte and Eltham. Across all of them, the same four problems turn up again and again.
Gates that do not self close or latch properly
This is one of the most common reasons a barrier fails. Hinges sag, springs lose tension, and latches drift out of line as posts shift with the seasons. You can test this yourself in a couple of minutes. Open the gate to a few different angles and let it go each time. It should close and latch without any help.
Gaps over 100mm under the barrier
Soil washes away, mulch gets raked back and pavers settle over time. A gap that was fine five years ago can easily measure over 100mm now. That’s enough space for a small child to squeeze through, so we measure along the whole fence line rather than spot checking.
Climbable objects too close to the fence
Trees, outdoor furniture, barbecues, retaining walls and even a stack of firewood can give a child a foothold. In leafy suburbs like Balwyn and Templestowe, overhanging branches and raised garden beds are often the cause.
Barriers under the 1.2m minimum height
Most barriers need to be at least 1.2m high, measured from the ground on the outside. A new garden bed or deck built against the fence raises the ground level. That can quietly drop the effective height below the minimum without anyone noticing.
What happens next if your pool passes
Receiving your certificate of compliance
Once you pass, we issue your certificate. Reports are provided within 24 hours, and compliance reports and certificates are available the same or next business day.
From there, you lodge the certificate with your council. Lodging simply means submitting it so the council’s records show your barrier complies. Keep a copy for your own files too, because buyers, agents and tenants may ask to see it.
Keeping track of the four year renewal cycle in Victoria
In Victoria, a certificate of barrier compliance must be renewed every four years. Your council can confirm your exact due date if you’re unsure. We suggest setting a calendar reminder about three months before it’s due. That gives you time to book an inspection and handle small repairs without a deadline hanging over you.
What happens next if your pool fails
A failed report gives you a fixed list of jobs, so you know exactly what stands between you and a certificate. The process has three steps: report, repairs, then reinspection.
Fixing each item on the report
Work through the list in order. Some jobs you can do yourself, like moving furniture or cutting back plants. Others, such as rehanging a gate or replacing a fence panel, may need a tradesperson. Show them the report so they fix exactly what was flagged and nothing gets missed.
Booking your free reinspection within 60 days
Our $189 inc. GST service includes one free reinspection within 60 days. Book it only once every item is sorted. That way the second visit is a quick confirmation rather than a fresh list of problems.
What further reinspections cost
If you need more than one reinspection, each extra visit is $150 inc. GST. You’ll find the full fee breakdown on our pricing page. There are no hidden fees or additional charges.
Real situations and how the report helped
The scenarios below are composites. They’re built from the patterns our inspectors see most often, rather than single named jobs, and we’ve kept details general to protect owners’ privacy. Here’s how each one usually plays out.
A Doncaster family with a gate that would not latch
The gate closes most of the time, but it bounces off the latch when released from halfway open. The report points to hinge tension and latch alignment as the cause. The owner adjusts the hinges and realigns the striker over a weekend, then books the free reinspection. The second visit takes a few minutes, and the certificate follows.
An Eltham buyer checking a pool before settlement
A buyer wants to know what they’re taking on before the sale goes through. A pre-purchase pool inspection picks up a low section of fence behind a garden bed. It also flags a pot plant sitting right beside the gate. With the report in hand, the buyer can raise the repairs with the vendor or budget for them. That’s far better than finding out after the moving truck has left.
A Kew landlord with an investment property
A landlord needs a compliant barrier at a rental but can’t be on site. The property manager arranges a third-party inspection instead. For commercial and third-party inspections, including investment properties and those requested by real estate agents, a $90 administration fee applies per on-site visit. The report goes to both the owner and the agent, so repairs can be organised quickly.
How to prepare so your next report is a clean one
A quick walk around before the inspector arrives
Set aside 15 minutes before the visit and run through these checks:
- Open each gate to several angles and make sure it self closes and latches every time.
- Look along the fence line for gaps over 100mm, especially near garden beds and drains.
- Move furniture, barbecues, bins and pot plants well clear of the barrier.
- Trim any branches or shrubs a child could use to climb.
- Measure the fence height from ground level on the outside.
- Check your CPR sign is up and easy to read.
- Confirm your pool or spa is registered with council.
For the complete list, use our pool inspection checklist.
When a pre-inspection makes sense
A pre-inspection is worth booking if your fence is older, you’ve recently renovated, or the property is about to go on the market. It also suits anyone who simply wants peace of mind. It shows you what needs attention ahead of time, so the formal result is a pass on the first go.
Get a clear, actionable pool safety report
A clear report saves you time, money and repeat visits. Our VBA-registered, fully insured inspectors cover Kew, Balwyn, Box Hill, Doncaster, Eltham, Heidelberg, Ivanhoe, Glen Waverley, Ringwood and suburbs right across Melbourne’s north east and surrounds. We hold 244 Google reviews at 5.0. Every report we write tells you exactly where you stand and what to do next.
All inclusive inspections and certificates are available for just $189 (inc. GST). Book your pool inspection today and get a same-day callback.
Frequently asked questions
How long does it take to receive my pool safety report?
Reports are provided within 24 hours of the inspection. Compliance reports and certificates are available the same or next business day. When you contact us to book, our Same Day Callback Guaranteed applies.
What if my report says my barrier is non compliant?
The report lists each item that needs fixing, along with our recommendations. You’ll have time to complete the work before a reinspection. One free reinspection is included within 60 days, and each extra reinspection is $150 inc. GST.
Does a pool safety report check hidden faults?
No. An inspection is a visual review of the barrier parts we can reach as they stand on the day. It reports what can be seen, so it isn’t a guarantee against faults that are hidden or that develop later.
How often do I need a new certificate in Victoria?
A certificate of barrier compliance in Victoria must be renewed every four years. Note the date in your calendar so the renewal doesn’t sneak up on you.
Is there a different fee for rental or commercial properties?
Yes. Commercial and third party inspections attract a $90 administration fee per onsite visit. This covers commercial buildings, investment properties, and inspections requested by real estate agents, builders or architects. An extra travel fee may apply for rural areas more than 45km from our office.
What does the $189 inspection include?
All inclusive inspections and certificates are available for just $189 (inc. GST). That covers the on site inspection analysis, the report, recommendations and the compliance certificate. It also includes one free reinspection within 60 days. There are no hidden fees or additional charges.

